How to clean your faucet filter and get rid of all the limescale: use a plastic bag and it will be as good as new!
As you know, due to hard water and limestone, calcification deposits can build up over time and block tap filters .
To always have clean faucets you must pay attention to cleaning the filter . This cleaning job should be done at least every 6 months to prevent lime scale buildup from creating water leakage problems.
However, we are often unable to manually remove filters from faucets . As you continue reading, you will discover a very simple and inexpensive method to do this .
All you have to do is find a durable food bag and you will have no more problems performing this cleaning job.
How to clean your faucet filter and get rid of all the limescale: use a plastic bag and it will be as good as new!
As mentioned earlier, it is often not possible to remove the filter from the faucet with your own hands. This is clearly a problem when you have to remove limescale from filters.
If you have difficulty disassembling it, there is an alternative and super effective method to clean the filter without hassle.
Just get a bag of solid food and you’re done!
Read on to find out what you need to do.
Here’s what you need:
2 generous tablespoons of citric acid
Water if necessary
Also retrieve:
1 x sturdy food bag
1 rubber band
Now, take it all back and find out the steps to follow.
Method
Once you get the food bag, pour in the tablespoons of citric acid. Then use a rubber band to secure the bag to the tap . Immediately afterwards, run the tap water until the filter is completely covered .
Once this process is completed, you can see the formation of some bubbles with the naked eye . This reaction is proof that the remedy is working properly .
At this point , let everything sit for a few hours , even better if it lasts a whole night . Once the necessary time has passed , remove the bag and the filter will be as good as new .
All you have to do is try this DIY remedy to see the distinct difference . By using this trick you will save a lot of money because you will avoid buying specific chemicals and you will have no more effort to disassemble and reassemble your filters.
